Stores

Changing input levels

This feature decreases or increases signal level to match the levels of other components.

Note: Each input can be adjusted to match the system's internal source sound levels.

To change the audio input levels, follow these steps:

Make sure the TV is on with the correct input selected

On the remote, press SYSTEM. The "Audio" icon at the top of the system menu should be highlighted

Press the DOWN arrow to highlight the device on which you want to adjust volume ("TV analogue input level," "CBL-SAT digital input level," etc.)

Press the RIGHT arrow and then UP arrow or DOWN arrow to adjust the volume for that device. If the volume is too high, lower it by selecting -3 or -6. If the volume is too low, select +3 or +6

Press EXIT to leave the system menu