Welcome to the new Bose.sg.
 

Enabling standby (low power) mode

You can enable standby (low power) mode by removing the Ethernet cable and disabling Wi-Fi and Bluetooth®. This will prevent the amp from connecting to your network and any Bluetooth device, as well as preventing the amp from being controlled by the SoundTouch® app until Wi-Fi and Bluetooth are re-enabled.

On the SA-5 amplifier, press and hold the Control button until the Wi-Fi indicator turns off

Within a few minutes, the unit will enter standby mode

To re-enable wireless network capabilities, including Bluetooth, press the Control button

Did this information help?

Great, thanks for the feedback. Please feel free to share additional comments below.
We’re sorry this page didn’t meet your expectations. Please tell us about your experience and/or what we could do better.
Submit
Thanks, we appreciate the additional feedback you’ve provided