Follow these steps to set up your system:
Place your speakers
Connect the speaker wires to the Acoustimass® module
Connect the speaker wires to your speakers. The connection will vary as shown, depending on whether you have a V30, V20 or V10 system
Connect the Acoustimass module and the display panel to the media console
Next, select and connect the video and audio connections between your V-class system's media console and your TV, and between the media console and your other home cinema devices, such as your DVD player and cable or satellite box. For help making connections, see Connecting an audio/video device
This is an example using an HDMI® cable:
Connect the power supply cables and insert batteries into the remote control
Plug the media console and Acoustimass power supply cables into an electrical outlet
Choosing your display language
The first time you power up your V-class system, the Display Language menu appears.
To select a display language, press the numeric key on the remote control that corresponds with your language preference. These are in numerical order as follows: English, Español, Deutsch, Français, Italiano, Nederlands, Dansk or Svenska.
You can change the display language at any time by pressing the System button on the remote. Press the right arrow to scroll to the Media Centre icon, then using the down arrow, select "Display Language."
Using the Setup menu
After powering up your system and selecting the display language, the setup menu appears. You can also select it at any time by pressing the System button on the remote and pressing the Right arrow to scroll to the setup icon. The setup menu lets you run the ADAPTiQ audio calibration system and program your remote to control your connected components.